KSB Aquavane Back Pull out Centrifugal Pump

Standard Design to DIN 24255

Application

The Aquavane centrifugal pump are used for general industrial, water supply, air conditioning, irrigation and drainage system, pressure boosting, fire fighting, heating and ventilating, industrial.

Design

Horizontal, single stage, end suctio centrifugal pump, complying with the requirements of EN 733 (DIN 24255).

Designation

• Example KSB A 150 400/AM
• Type : A
• Discharge diameter (mm) : 150
• Nominal impeller diameter (mm) : 400
• Materials of construction : A
• Shaft sealing : M

Shaft seal

The Aquavane is packed gland as standard. Mechanical seal is offered an option.

Conforms to DIN 24255

All dimensions of Aquavane range fully comply with DIN 24255 allowing full interchangeability with equivalent pumps.

Significant Parts Interchangeability

Maximum interchangeability of component entry across the range is ensured with the modular construction of the Aquavane.

Back Pull Out Design

With the back pull out feature, the rotating element can be removed for service work without disturbing pipe-work connections and driver. The design of the bearing housing allows easy access to the gland.

Bearings

Grease nipples are fitted as standard to allow periodic re-greasing of the bearings ensuring extended service life.

Shaft Sleeve

A stainless steel shaft sleeve is fitted as standard to packed gland models. The shaft sleeve is an important feature. If scoring occurs under the gland packing, the shaft sleeve can be easily replaces without the need to replace the whole shaft. This allows easy maintenance and saves you money.

Spare Parts

With the high parts interchangeability, spare parts inventory is minimized, resulting in off the shelf deliveries.